The FMR75 Fluidised Reactor has been developed by D-D to give the ultimate economic solution for fluidising a whole range of materials that are used on your marine or freshwater aquarium.
Many smaller reactors on the market look good, are packaged well and are competitively priced however when you get down to using them they just do not tick all of the boxes. D-D have spent a lot of time ironing out the bugs to make this a flexible product, ideal for all hobbyists.
Product Code - FMR75
Rowaphos or Phosphate Removers
Nutrifix Bio Pellets (Up to 700ml)
Biological Sand as a fluidised sand filter
These reactors are small enough to use on the smallest of nano tanks but with sufficient capacity to use on larger systems.
128mm x 94mm x 440mm (including fittings and lid)
Reaction tube outer diameter - 80mm
Tube height between upper/lower perforated plates - 340mm
Can hang on glass up to 25mm
Designed to be the correct height to hang on a 15" sump (will stand inside smaller sumps or hang onto taller sumps).
Plug & Play
How often do you buy some equipment and then find you do not have all of the parts to install it?
The FMR 75 reactor is supplied with all of the items that you need to allow you to get going.
3 x lengths of clear plastic tubing
Non return valve
Flow adjustment tap
2 Grades of media sponges (1 of each)
8 x cable ties for securing the pipework
Affordable Quality Build
The FMR75 Reactor is affordable enough to be used on small tanks or to allow multiple units on larger tanlks, however there is no compromise over design and build quality as it is no good having the best reactor in the world if it breaks after 5 minutes of use.
It is important to be able to mount the reactor in a range of positions depending on the system. The FMR75 can stand in the sump, beside the sump, hang on the sump or hang and clamp directly on the tank via the bracket incorporated into the lid design. The inlet and outlet pipes can be fitted in a number of positions to allow pipework to run in different directions.
The main requirement of the reactor is to fluidise media efficiently which the FMR reactor does very well. The base of the body is dished to disperse an even flow of water from the central downpipe through 360 degrees, preventing dead spots.
Next there is a lower perforated diffusion plate which acts as a lower support for the media when not switched on which creates an empty plenum area below for faster fluidisation on restarting and to prevent compacting of media at the base of the reactor. A coarse sponge is provided to be used with fine materials that may pass through the perforated plate however this is not normally required for most medias.
Loss of Media
Many reactors are not fitted with any type of barrier to stop the media from passing out of the top of the reactor and into the aquarium, relying simply on reducing the flow rate so that the fluidisation is within the bottom 2/3 of the reactor. Anyone who has used a reactor will know that on start up that you get a sudden flood of water which washes a portion of the media out before the fluidisation settles down.
The FMR75 is fitted with an upper perforated plate and also with a fine sponge to restrict all but the finest of particles from exiting the reactor in this situation.
Note: When used with Bio Pellets that the upper sponge should not be used however the perforated plate will prevent the media from being flushed out of the reactor.
Ease of Ability to Refill
Many reactors make it difficult or impossible to refill the media without emptying out the reactor first as the central tube comes off with the lid. This and the lack of a lower diffusion plate means that the media fills the tube when you put the lid back on, making it hard to restart.
The central feed tube on the FMR75 is separate and so the lid can be removed easily leaving the tube and media in place so that it is a simple matter to top up and to put the lid back on. Sounds obvious but you would be amazed by how many reactors you cannot do this with.
There are no multiple screws to undo to remove the lid as it is screwed on and sealed with a multi stage replacable seal at the top of the body.
In a power off situation, where the reactor sits above the water level, the water and media will back syphon through the pump. The FMR75 is supplied with a non return valve which can be used if required, depending on installation, and prevents this problem from occuring - simple but effective.
Bank payments: All finnish banks have payment buttons at their disposal.
Credit card payments: You can pay online with PayPal, Visa, Visa Debit, Visa Electron, MasterCard, Debit MasterCard and American Express cards. The online store uses international Verified By Visa, MasterCard SecureCode and American Express SafeKey authentication services.
Mobile payment methods: MobilePay and Apple Pay
Invoice and installment services: services are provided by Klarna and through Paytrail by Collector and Jousto.
Your order will be delivered as a Postal package. Delivery costs in Finland 4,90€ when the purchase value is 1-29,99€. When the purchase value is 30€ or more, the delivery costs are free max 30kg.
In addition, you can choose home delivery in Finland for 9€/delivery.
Our most common delivery times to Finland are 1-3 business days from the time of ordering, depending on the order and delivery method. Note! Does not apply to custom-made products.
For postal parcels, the tracking ID is automatically sent via email when the order is left from our logistik center.
Your order will be delived as GLS standard. Delivery cost will be seen in products page when you add the products to your shopping card.
Our most common delivery times in EU area is 2-4 business days from the ordering, depending on the order. Note! Does not apply to custom-made products. Please note ! If the product is out of stock in our own warehouse, the normal delivery time is usually max 10 business days.
For GLS parcels, the tracking ID is automatically sent via email when the order is left from our logistik center.
OUTSIDE OF EU
your order will be delivered as DHL Express. Delivery cost will be seen in products page when you add the products to your shopping card.
Our most common delivery times outside of EU areas is 2-4 business days from the ordering, depending on the order. Note! Does not apply to custom-made products. Please note ! If the ordered product is out of stock in our own warehouse, the normal delivery time is usually max 10 business days.
For DHL Express parcels, the tracking ID is automatically sent via email when the is left from our logistik center.
On heavy orders additional cost will be applied.
All products prices are VAT:0% with outside EU orders, if checkout is not automatically give these prices, please send email: email@example.com
Extra custom duties may be applied in all orders outside EU area
Exchange and return policy in: Finland, Sweden, Estonia
You have the right to exchange or return all or part of your order within 14 days of receiving the order. Note! does not apply to ordering and custom made products.
The right of return only applies to unused and salable products with product labels in the original packaging.
The subscriber is responsible for paying the refund. The return fee in 5,90€.
We deliver all orders by post. Posti stores packages for 7 days at all its pick-up points. If the package is not picked up during this time, it will be returned to the sender. An unclaimed shipment is not a return under the Consumer Protection Act. In these cases, we will automatically charge 15€ for postage and handling in connection with the refund.
According to the return, include the following information:
a copy of the Aqua Nomad order confirmation
The return address varies depending on the product to be returned, please contact us before returning firstname.lastname@example.org
We do not accept returns more than 14 days after delivery. Once the refund is accepted, the money will be refunded directly to your account upon receipt and processing of the refund.
Problem situations during transport and for defective products:
If the product has been lost during transport, damaged or the wrong product has been deliveded to the customer, the customer must report the error immediately to email@example.com
Notification of incorrect delivery or defective product must be made within 14 days of receipt of the product. If the package is damaged in the mail, a complaint must be made about the product to the post office immediately.