All prices included VAT 24%. When you add address to checkout, you will see corrected price according your destination.
€929,00 EUR
VAT-Free price for customers outside of the EU: €749,19 EUR
Emergency Overflow
Deltec skimmers are characterized by particularly good skimming results. TheDeltec Skimmer 3000ihas a newly developed emergency overflow. This prevents the "overcooking" of the skimmer when the water level in the skimmer rises. This can happen, for example, by discontinuing the conveyor pump and by adding additional water to the filter sump. But even if there are problems with the air supply, e.g. by bending the silicone hose or foreign body in the air intake line, the water level increases. This can cause the skimmer to "boil over" and the water rises so high that it is pressed into the foam pot and the broth is rinsed back into the aquarium. This leads to an extreme load of water. Due to the emergency made by Deltec this is prevented and thus the aquarium protected from impurities.
Emergency overflow pipe & regulator pipe
The water level in the skimmer can be read off at the emergency overflow pipe. In addition, the minimum and maximum markings help to optimize the water level. By the possibility to exchange the emergency overflow pipe with the regulator pipe, the user has the possibility to decide how the pipes are arranged.
Pump
TheDeltec Skimmer 3000iis operated with the Deltec pump DCC 5. This 24V DC pump can be controlled via a ten-stage controller and can be optimally adjusted to the water level and the water load. On the (for most aquariums) optimal level 8, with only 23 – 43 watts about 1600 liters of air are generated. The maximum are 1900 litre per hour air.
The Ergonomic Cylinder Shape
Thanks to the ergonomic cylinder shape, theDeltec Skimmer 3000iachieves the best results with skimming. The shape of the skimmer does not taper upwards. This allows the small air bubbles to rise unhindered, are fully saturated and burst only in the riser of the foam pot. From there, the collected broth can be discharged via a drain hose without having to take the foam pot down.
Hollow Chamber Floor
An additional innovation of theDeltec Skimmer 3000iis the hollow chamber floor. This helps to dampen the noise still further, whereby the already quietDeltec Skimmer 3000iis called "whisper quiet". In addition, the water flows back through the hollow chamber floor. The water is fed at the lowest possible point out of the skimmer, as a result of which almost no air bubbles can flow into the aquarium.
Cleaning System
As an option, theDeltec Skimmer 3000ican be equipped with a cleaning system in which the inner riser pipe is cleaned of deposits by turning the foam pot lid. If these deposits are not removed at regular intervals, the skimming performance is drastically reduced, as foam bubbles on this layer burst prematurely and thus cannot contribute to water purification.
Dismantling, Dimensions & Construction
The regular cleaning of the pump is very easy thanks to the simple and fast dismantling of the skimmer.Deltec Skimmer 3000ican be mounted and disassembled without tools. Our tests have shown that the pump can be removed from the skimmer in less than 20 seconds.
The dimensions of our skimmer are chosen so that they can be placed comfortably in their filter basin. Due to the high volume of the cylinder shape, a small base area is sufficient. You can operate theDeltec Skimmer 3000ivariably in 18 cm to 26 cm water depth.
Payment methods:
We deliver orders in the following ways:
FINLAND
EU AREA
OUTSIDE OF EU
Exchange and return policy in: Finland, Sweden, Estonia
Unclaimed shipment
According to the return, include the following information:
Return address:
Problem situations during transport and for defective products: