All prices included VAT 24%. When you add address to checkout, you will see corrected price according your destination.
€169,00 EUR
VAT-Free price for customers outside of the EU: €136,29 EUR
DeltecT5 UV Sterilizers
Deltec T5 UV Sterilizers are designed to be used for aquariums only. They are compact in size and superior to conventional UV Sterilizers because both the T5 tube and the protective tube are made of quartz. The electronic ballast and the T5 ensure an even radiation transmission, highest efficiency, and long life span (up to 9000hrs).
Installation
The sterilizer body itself is waterproof to IP67, however, the ballast box is not. It is, therefore, most important to install the ballast box in a dry place. The UV Sterilizers can be simply placed in a suitable location or screwed to a wall through slots provided in item (9). When fitting the UV Sterilizer make sure
- that there is enough space to remove the tube.
- when placing it flat on the floor the outlets must point upwards to ease bleeding.
- when fitting it vertically the lead should come from the top. The direction of water flow should be from bottom to top.
Assembly
The quartz sleeve No 4 is very sensitive to any kind of force. Therefore great care must be taken when installing it into the body. Hold the body vertically with the open end at the top. Place the quartz sleeve inside the body without any force until it is located in the fins (10) at the bottom. Fit the viton seal over the end of the quartz sleeve and onto the seat (11) in the body. Please make sure to connect the T5 tube correctly to the socket. The 4 pins are not equally spaced! They form a rectangle and not, as it may appear, a square. Trying to force T5 tube and the socket in the wrong way may lead to destruction. Feed the T5 tube into the quartz sleeve and tighten first of all cap (12) and then tighten the cap nut (13).
Important
Never look into the T5 UV tube when illuminated.If this should happen accidentally medical advice should be taken.Exposure to UV radiation can cause serious damage to the eye.When fitting the hose tail connectors use the seals provided with the unit.
The T-pieces on double and 4 fold units are not glued. The angle of these T-pieces can be chosen to suit the installation of the unit (i.e. horizontally or vertically). Afterward, the T-pieces have to be glued into position. The water flow must be regulated on the inlet side through a tap. The water flow on the outlet side should not be restricted in any way or any other measures taken witch may cause a pressure build-up inside the unit. Before switching on the electricity, check the UV sterilizer and all connections for leaks.
Regulate the water flow as per table, if in doubt reduce rather than increase the flow. Increased flow reduces efficiency.
Maintenance
After app. 6 months clean the quartz sleeve with alcohol. Replace the T5 tube after used 9000 hrs. (1 year)
Safety
Never look into UV light with unprotected eyes.Should this happen accidentally, take medical advice.
Ensure that the ballast box is kept away from water.
Payment methods:
We deliver orders in the following ways:
FINLAND
EU AREA
OUTSIDE OF EU
Exchange and return policy in: Finland, Sweden, Estonia
Unclaimed shipment
According to the return, include the following information:
Return address:
Problem situations during transport and for defective products: